IBD Airbrush Machine

The IBD Airbrush Machine with Compressor brings professional-grade nail art to your fingertips — cordless, rechargeable, and compatible with both gel polish and lacquer. Whether you're creating seamless ombré gradients, intricate stencil designs, or flawless base coverage, this machine delivers precision control every time.

What's Included: Compressor, airbrush nozzle, trigger, pressure control knob, 10 metal cups, 20cc & 40cc plastic cups, USB charging cord.

Key Features:

• Cordless & rechargeable via USB — no cords in your way
• Adjustable nozzle: fine lines to broad coverage
• Variable air pressure for blending, gradients & full coverage
• Compatible with gel polish, lacquer & acrylic paints
• Easy-clean design for quick maintenance
• Limit continuous use to 30 minutes; allow to cool before resuming

How to Use:

1. Ensure that the airbrush machine is fully charged before initial use.
2. Install the airbrush on the air pump.
3. Add gel polish/lacquer to cup and dilute with thinner. Ratio should be 1 part gel polish/lacquer to 1 part thinner.
4. Thoroughly mix gel polish/lacquer and thinner. Ensure that the mixture is smooth and free of any lumps or streaks.
5. Short press the ON/OFF switch on the compressor.
6. Test spray on a piece of paper to check the consistency and flow of the diluted gel polish/lacquer.
   Note: Adjust the mixture if necessary to achieve the desired spray pattern and coverage.
7. Hold the airbrush machine perpendicular to the nail surface, approximately 4-6 inches away.
8. Slightly pull the trigger then move the airbrush gun in a smooth, fluid motion to achieve desired design.
9. Cure gel nail polish according to manufacturer's instructions. If using lacquer, allow it to fully dry.
   Note: If applying multiple layers, make sure each layer is fully cured/dry before applying another coat.
10. Apply topcoat.

Warnings:

• Do not use while charging.
• Fully charge before using.
• Avoid adding oily liquids as they can lead to nozzle clogging.
• When using the airbrush machine, use clean water to test it first.
• If the airbrush isn't spraying it may be because the fluid control knob is too tight, or the nozzle is blocked. Adjust the fluid control knob or clean the nozzle.
• Thinning the paint correctly is very important, as thick paint may clog the airbrush machine.
• Limit usage to no more than 30 minutes continuously. Allow the airbrush machine to cool down before resuming use.
• Ensure that all reagents utilized are particle-free to prevent nozzle clogging.
• Do not soak the airbrush machine in water.
• Keep away from children.
• Keep instructions, warnings and cautions for future reference.
• Failure to follow instructions, warnings and cautions may result in serious injury.

DK Beauty is an authorized dealer of International Beauty Design (IBD).